General Terms of delivery
Issued by DIGITEL Elektronik GmbH
1.1 These terms and conditions apply to all contracts, deliveries and other services, including consultancy services. They shall govern legal transactions between business enterprises, namely the delivery of commodities and, mutatis mutandis, the rendering of services. Software transactions are with precedence governed by the Software Conditions issued by the Austrian Electrical and Electronics Industry Association, assembly work by the Terms and Conditions for Assembly Work issued by the Austrian Power Current and Light Current Engineering Industry and/or (where applicable) the Terms and Conditions for the Assembly of Electrical Equipment used in Medicine issued by the Austrian Electrical and Electronics Industry (the current versions are available under www.feei.at).
1.2 Any departure from the terms and conditions mentioned in 1.1 above shall be valid only if expressly accepted in writing by Seller.
2. Submission of offers
2.1 Seller’s offers shall be deemed offers without engagement.
2.2 Tender documents and project documentation must not be duplicated nor made available to third parties without the permission of Seller. They may be claimed back at any time and shall be returned to Seller immediately if the order is placed elsewhere.
3. Conclusion of contract
3.1 The contract shall be deemed concluded upon written confirmation by Seller of an order received or upon dispatch of a delivery.
3.2 Particulars appearing in catalog, folders etc. as well as any oral or written statements shall only be binding if Seller makes express reference to them in the confirmation of the order.
3.3 Subsequent amendments of or additions to the contract shalI be subject to written confirmation.
4.1 Prices shall be quoted ex works or ex Seller’s warehouse without VAT, packing and packaging, loading, disassembly, take-back and proper recycling and disposal of waste electrical and electronic equipment for commercial purposes as defined by the Ordinance Regulating the Handling of Waste Electrical Equipment. Buyer shall be liable for any and all charges, taxes or other duties levied in respect of delivery. If the terms of delivery include transport to a destination designated by Buyer, transport costs as weIl as the cost of any transport insurance desired by Buyer shall be borne by the latter. Delivery does not, however, include unloading and subsequent handling. Packaging materials will be taken back only by express agreement.
4.2 Seller reserves the right to modify prices if the order placed is not in accordance with the offer submitted.
4.3 Prices are based on costs obtaining at the time of the first quotation. In the event that the costs have increased by the time of delivery, Seller shall have the right to adjust prices accordingly.
4.4 In carrying out repair orders, Seller shall provide all services deemed expedient and shall charge Buyer for the same on the basis of the work input and/or expenditures required. The same holds for any services or additional services the expediency of which becomes apparent only as the repair orderis executed. ln such an event special notification of Buyer shall not be required.
4.5 Expenses for estimates of costs of repair and maintenance or for expert valuations shall be invoiced to Buyer.
5.1 The period allowed for delivery shall commence at the latest of the following dates:
a) the date of order confirmation by Seller;
b) the date of fulfillment by Buyer of all the conditions, technical, commercial and other, for which he is responsible;
c) the date of receipt by Seller of a deposit or security due before delivery of the goods in question.
5.2 Delivery times are not liable.
5.3 Buyer shall obtain whatever licences or approvals may be required from authorities or third parties for the construction of plant and equipment. If the granting of such licences or approvals is delayed for any reason the delivery period shall be extended accordingly.
5.4 Seller may carry out, and charge Buyer for, partial or advance deliveries. If delivery on call is agreed upon, the commodity shall be deemed called off at the Iatest one year after the order was placed.
5.5 In case of unforeseeable circumstances or circumstances beyond the parties control, such as all cases of force majeure, which impede compliance with the agreed period of delivery, the latter shall be extended in any case for the duration of such circumstances; these include in particular armed conflicts, official interventions and prohibitions, delays in transport or customs clearance, damages in transit, energy shortage and raw materials scarcity, labor disputes, and default on performance by a major component supplier who is difficult to replace. The aforesaid circumstances shall be deemed to prevail irrespective of whether they affect Seller or his subcontractor(s).
6. Passage of risk and place of Performance
6.1 Enjoyment and risk shall pass to Buyer at the time of departure of the goods ex works or ex warehouse regardless of the terms of quotation (such as carriage paid, C.I.F. etc.) agreed upon. This provision also includes the case of shipment being effected, organised and supervised by Seller and the case of delivery being made in connection with assembly work to be undertaken by Seller.
6.2 For services the place of performance shall be the place at which the service is rendered; the risk in respect of such services or any part thereof that may have been agreed upon shall pass to Buyer at the time the services have been rendered.
7.1 Unless otherwise agreed, the purchase price (net price plus VAT) shall be paid in full amount within 30 days of the invoiced date.
7.2 In the case of part settlements the individual part payments shall fall due upon receipt of the respective invoices. The same shall apply to amounts invoiced for additional deliveries or resulting from additional agreements beyond the scope of the original contract, irrespective of the terms of payment agreed upon for the principal delivery.
7.3 Payment shall be made without any discount free Seller’s domicile in the agreed currency. Drafts and checks shaII be accepted on account of payment only, with all interest, fees and charges in connection therewith (such as collection and discounting charges) to be borne by Buyer.
7.4 Buyer shall not be entitled to withhold or offset payment on the grounds of any warranty claims or other counterclaims.
7.5 Payment shall be deemed to have been effected on the date at which the amount in question is at Seller’s disposal.
7.6 If Buyer fails to meet the terms of payment or any other obligation arising from this or other transactions, Seller may without prejudice to his other rights
a) suspend performance of his own obligations until payments have been made or other obligations fulfilled, and exercise his right to extend the period of delivery to a reasonable extent,
b) call in debts arisen from this or any other transactions and charge default interest amounting to 1.25 % per month plus turnover tax for these amounts beginning with the due dates, unless Seller proves costs exceeding this. In any case Seller has the right to invoice all expenses arising prior to a lawsuit, especially reminder charges and lawyer’s fees.
7.7 Discounts or bonuses are subject to complete payment in due time.
7.8 Seller retains title to all goods delivered by him until receipt of all amounts invoiced including interests and charges. Buyer herewith assigns his claim out of a resale of conditional commodities, even if they are processed, transformed or combined with other commodities, to Seller to secure the latter’s purchase money claim. In the case of resale granting respite Buyer shall have the power of disposal of the product under retention of ownership only with the proviso that upon reselling Buyer notifies the secondary buyer of the assignment for security or enters the assignment in his account books. Upon request Buyer has to notify the assigned claim and the debtor thereof to Seller, and to make all information and material required for his debt collection available and to notify the assignment to the third-party debtor. If the goods are attached or otherwise levied upon, Buyer shalI draw attention to Sellers title and immediately inform Seller of the attachment or levy.
8. Warranty and acceptance of obligation to repair defects
8.1 Buyer shall examine the goods received for quantity and property without delay. Obvious and/or recognised defects, short deliveries and wrong deliveries shall be notified in writing after no later than 8 days, or the goods are accepted. In case of damages the carrier has to be informed in written within 3 days from delivery.
8.2 Once the agreed terms of payment have been complied with, Seller shall, subject to the conditions hereunder, remedy any defect existing at the time of acceptance of the article in question whether due to faulty design, material or manufacture, that impairs the functioning of said article. From particulars appearing in catalogues, folders, promotional literature as well as written or oral statements which have not been included in the agreement no warranty obligations may be deduced.
8.3 Unless special warranty periods operate for individual items the warranty period shall be 24 months. These conditions shall also apply to any goods supplied, or services rendered in respect of goods supplied, that are firmly attached to buildings or the ground. The warranty period begins at the point of passage of risk acc. to paragraph 6.
8.4 The foregoing warranty obligations are conditional upon the Buyer giving immediate notice in writing of any defects that have occurred and such notice reaching the Seller. Buyer shall prove immediately the presence of a defect, in particular he shall make available immediately to Seller all material and data in his possession. Non-observance of Buyer’s obligation to give immediate notice of the defect invalidates the right of claiming consequential harm caused by a defect. Upon receipt of such notice Seller shall, in the case of a defect covered by the warranty under 8.1 above, have the option to replace the defective goods or defective parts thereof or else to repair them on Buyer’s premises or have them returned for repair, or to grant a fair and reasonable price reduction.
8.5 Any expenses incurred in connection with rectifying defects (e. g. expenses for assembly and disassembly, transport, waste disposal, travel and siteto- quarters time) shall be borne by Buyer. For warranty work on Buyer’s premises Buyer shall make available free of charge any assistance, hoisting gear, scaffolding and sundry supplies and incidentals that may he required. Replaced parts shall become the property of Seller.
8.6 If an article is manufactured by Seller on the basis of design data, design drawings, models or other specifications supplied by Buyer, Seller’s warranty shall be restricted to non-compliance with Buyers specifications.
8.7 Seller’s warranty obligation shall not extend to any defects due to assembly and installation work not undertaken by Seller, inadequate equipment, or due to non-compliance with installation requirements and operating conditions, overloading of parts in excess of the design values stipulated by Seller, negligent or faulty handling or the use of inappropriate materials, nor for defects attributable to material supplied by Buyer. Nor shall Seller be liable for damage due to acts of third parties, atmospheric discharges. Excess voltage and chemical influences. The warranty does not cover the replacement of parts subject to natural wear and tear. Seller accepts no warranty for the sale of used goods.
8.8 The warranty shall lapse immediately if, without written consent of Seller, Buyer himself or a third party not expressly authorised undertakes modifications or repairs on any items delivered.
8.9 Claims acc. to § 933b ABGB are struck by the statute of limitation with lapse of the period mentioned under point 8.2.
8.10 The provisions of sub-paragraphs 8.1 to 8.7 shall apply, mutatis mutandis, to all cases where the obligation to repair defects has to be accepted for other reasons laid down by law.
8.11 At contracts for work and services by mutual agreement we are exempted from duty to warn according to § 1168a ABGB similar terms in other AGB or other applied statutory provisions.
9. Withdrawal from contract
9.1 Buyer may withdraw from the contract only in the event of delays caused by gross negligence on the part of Seller and only after a reasonable period of grace has elapsed. Withdrawal from contract shall be notified in writing by registered mail.
9.2 Irrespective of his other rights Seller shall be entitled to withdraw from the contract
a) if the execution of delivery or the inception or continuation of services to be rendered under the contract is made impossible for reasons within the responsibility of Buyer and if the delay is extended beyond a reasonable period of grace allowed;
b) if doubts have arisen as to Buyer’s creditworthiness and if same fails, on Seller’s request, to make an advance payment or to provide adequate security prior to delivery, or
c) if, for reasons mentioned in 5.4, the period allowed for delivery is extended by more than half of the period originally agreed or by at least 6 months.
9.3 For the reasons given above withdrawal from the contract shall also be possible in respect of any outstanding part of the delivery or service contracted for.
9.4 If bankruptcy proceedings are instituted against any contracting party or an application for bankruptcy proceedings against that party is not granted for insufficiency of assets, the other party may withdraw from the contract without allowing a period of grace.
9.5 Without prejudice to Seller’s claim for damages including expenses arising prior to a lawsuit, upon withdrawal from contract any open accounts in respect of deliveries made or services rendered in whole or in part shall be settled according to contract This provision also covers deliveries or services not yet accepted by Buyer as weIl as any preparatory acts performed by Seller. Seller shall, however, have the option alternatively to require the restitution of articles already delivered.
9.6 Withdrawal from contract shall have no consequences other than those stipulated above.
9.7 The assertion of claims on the ground of laesio enormis, error, or lapse of purpose by the Buyer is excluded.
10. Disposal of waste electrical and electronic equipment
10.1 The Buyer of electrical/electronic equipment for commercial purposes, incorporated in Austria, is responsible for the financing of the collection and treatment of waste electrical and electronic equipment as defined by the Ordinance Regulating the Handling of Waste Electrical Equipment, if he is himself the user of the electrical/ electronic equipment. If the Buyer is not the end user, he shall transfer the full financial commitment to his customer by agreement and furnish proof thereof to the Seller.
10.2 The Buyer incorporated in Austria shall ensure that the Seller is provided with all information necessary to meet the Seller’s obligations as manufacturer/importer, particularly according to §§ 11 and 24 of the Ordinance Regulating the Handling of Waste Electrical Equipment and the Waste Management Act.
10.3 The Buyer incorporated in Austria is liable vis-à-vis the Seller for any damage and other financial disadvantages incurred by Seller due to Buyer’s failure to meet or fully meet his financing commitment or any other obligations according to Article 10. The Buyer shall bear the burden of proof of performance of this obligation.
11. Seller’s liability
11.1 Outside the scope of the Product Liability Act, Seller shall be liable only if the damage in question is proved to be due to intentional acts or acts of gross negligence, within the limits of statutory provisions. Seller shall not be liable for damage due to acts of ordinary negligence nor for consequential damages or damages for pure economic loss, loss of profits, loss of savings or interest or damage resulting from third-party claims against buyer.
11.2 Seller shall not be liable for damages in case of non-compliance with instructions for assembly, commissioning and operation (such as are contained in instructions for use) or non-compliance with licensing requirements.
11.3 Claims that exceed the contractual penalties that were agreed on are excluded from the respective title.
12. Industrial property rights and copyrights
12.1 Buyer shall indemnify Seller and hold him harmless against any claims for any infringement of industrial property rights raised against him if Seller manufactures an article pursuant to any design data, design drawings, models or other specifications made available to him by Buyer.
12.2 Design documents such as plans and drawings and other technical specifications as well as samples, catalogues, prospectuses, pictures and the like shall remain the intellectual property of Seller and are subject to the relevant statutory provisions governing reproduction, imitation, competition etc. The provisions of 22 above shall also cover design documents.
Should individual provisions of the contract or of these provisions be invalid the validity of the other provisions shall not be affected. The invalid provision shall be replaced by a valid one, which comes as close to the target goal as possible.
14. Jurisdiction and applicable law
Any litigations arising under the contract including litigations over the existence or non-existence thereof shall fall within the exclusive jurisdiction of the competent court at Sellers domicile; The contract is subject to Austrian law excluding the referral rules. Application of the UN Convention on Contracts for the lnternational Sale of Goods is renounced.