|
DIGITEL Low Volume Sampler |
| Model | DPA96
|
|
| Technical data | ||
| Type of construction | Laboratory housing of anodised aluminium | Laboratory housing of anodised aluminium |
| Power supply | 230V +6/-10% / 50Hz / max.400VA | 230V +6/-10% / 50Hz / max.50VA |
| Fuse protection | 10A | 10A |
| Specification connection cable | 3 x 0,75 mm², 10 A, 250 V | 3 x 0,75 mm², 10 A, 250 V |
| Installation | Category II (Standard power) | Category II (Standard power) |
| Field of application | 5... 40 °C; 10 ... 90 % rF resp.. max. operation altitude: 2000 m above sea level.* |
5... 40 °C; 10 ... 90 % rF resp.. max. operation altitude: 2000 m. above sea level* |
| Flow rate | 0.2 - 2.5 l/min (DPA96*-02) 0.6 - 5.0 l/min (DPA96*-05) 1.0 - 10 l/min (DPA96*-10) 1.5 - 15 l/min (DPA96*-15) 2.0 - 25 l/min (DPA96*-25) 4.0 - 40 l/min (DPA96*-40) 5.0 - 50 l/min (DPA96*-50) |
0,2 - 1,2 l/min |
| Volume flow“ control accuracy | < 5% of MBE | < 5% of MBE |
| Suction unit, average durability | 36.000 h | 12.000 h |
| reproducible accuracy settings (according to UMEG-report Nr. 6-08/00) | +- 0,45% | +- 0,45% |
| Accuracy logged standards and measured volumes: | <+/- 2% | <+/- 2% |
| Time programs | Work, Pause ( 0 ... 59999 minutes each); Start time adjustable using date and time. | Work (0 ... 59999 minutes each); Start time adjustable using date and time. |
| Outer dimensions | 450 x 345 x 220 mm (H x W x D) |
370 x 236 x 154 mm (H x W x D) |
| Weight | ca. 20 kg | ca. 5 kg |
| Protection class | IP50 | IP50 |
| Underpressure | > 400 mbar at 50 l/min |
max. 200 mbar |
| Analogue remote control via interface | yes |
yes |
| Logging via RS-232C | yes |
yes |
| Switch-off overloading | yes |
yes |
| motor loading display | yes |
yes |
| Multi- lingual logging | yes |
yes |
| Battery-backed data memory | yes |
yes |
| Battery-backed clock module | yes (+/- 4 sec/ day) |
yes (+/- 4 sec/ day) |
| Interface logging | DIGITEL, Bayern-Hessen-Protokoll,
AK-Protokoll, customer specific |
DIGITEL, Bayern-Hessen-Protokoll,
AK-Protokoll, customer specific |
| Power consumption per day at a nozzle capacity of 75% and an activated pre-separator heating | approx. 7 kWh |
approx. 1 kWh |
| Options | ||
| Inlets extern | TSP; PM10; PM2,5; PM1 |
TSP; PM10; PM2,5; PM1 |
| Memory cards (PCMCIA) internal | yes |
yes |
| Log printer | yes |
yes |
| Ext. Meteo data logging | yes |
yes |
| Ext. 16-port returnable valve | yes |
yes |
| Ext. 8-port returnable valve | yes |
yes |
| Field housing IP54 | yes |
yes |
*
Special construction for operation altitudes over 2000 m. above sea level
on request
Dimension drawings: DPA96
in Laboratory housing (pdf, ca. 82 kByte) |